Program features

Module EN16.8 can be used for the design of horizontal vessels without reinforcement rings on saddles acc. EN 13445-3 section 16.8.

The allowable stresses for testing pressure can be specified acc. EN 14025 by selecting the input value: Regulation = 1.

The saddle types A, B, C acc. EN 13445-3 are illustrated in Fig. 16.8-

The program is divided into 7 calculation sections:

• 16.6 Line loads due to horizontal forces and moments
• 16.8.4 Conditions for saddles without stress analysis
• 16.8.5 Forces and moments at the saddles
• 16.8.6 Load limit between the saddles
• 16.8.7 Load limit at the saddle without reinforcement plate
• 16.8.7 Load limit at the saddle with additional reinforcement plate
• AD-S3/2:6 Strength calculation of the saddle

Price: 770 EUR plus VAT

Fig. 16.8-1 Saddle types A, B, C