| Module | Program description |
|
Net price EUR |
| C | Heat exchangers | ||
| Ca | General heat exchanger design methods | 190,- | |
| Cb | Heat transfer through walls | 150,- | |
| Cd | Heat transfer equipment | 255,- | |
| D | Properties | ||
| Dee | Thermal conductivity of beds | 150,- | |
| The properties modules CO2, H2O, LUFT (Air), N2, NH3, O2 and TOIL are included in the module package. You will find descriptions and individual prices in the price list under properties | |||
| E | Thermal conductivity | ||
| Ea | Steady-state heat conduction | 190,- | |
| Eb | Heat loss of walls and pipeworks | 150,- | |
| Ec | Unsteady-state heat conduction | 150,- | |
| F | Heat transfer in free single-phase flow | ||
| Fa | Heat transfer by natural convection around immersed bodies | 190,- | |
| Fb | Thermal output of heating appliances operating with hot water | 150,- | |
| Fc | Heat transfer by natural convection in enclosed fluid layers | 190,- | |
| Fd | Free convection in open fluid layers | 150,- | |
| Fe | Combined free and forced convection heat transfer around immersed bodies | 190,- | |
| G | Heat transfer in forced single-phase flow | ||
| Ga | Heat transfer in pipe flow | 150,- | |
| Gb | Heat transfer in a concentric annulus and in rectilinear gap | 190,- | |
| Gc | Heat transfer in flow through coils | 190,- | |
| Gd | Heat transfer in single-phase flow | 150,- | |
| Ge | Heat transfer lengthwise around individual tubes, wires and long cylinders | 150,- | |
| Gf | Heat transfer in cross-flow around individual tubes, wires, profiled cylinders | 150,- | |
| Gg | Heat transfer during cross-flow around simngle tube rows and through tube bundles | 190,- | |
| Gh | Shell-side heat transfer in baffled shell-and-tube heat exchangers | 255,- | |
| Gj | Fluid particle heat transfer in flow through beds of solids | 150,- | |
| Gk | Heat transfer for impingement flow | 150,- | |
| H | Heat transfer for vaporization | ||
| Hab | Pool boiling of saturated liquids | 255,- | |
| Hba | Flow boiling of subcooled liquids | 190,- | |
| Hbb | Flow boiling of saturated liquids | 255,- | |
| Hbc | Critical boiling states pure liquids / binary mixtures | 190,- | |
| Hbd | Post-dryout heat transfer during forced convection | 190,- | |
| J | Condensation | ||
| Ja | Film condensation of pure vapours | 255,- | |
| Jba | Film condensation of binary mixtures with or without an inert gas | 410,- | |
| Jc | Dropwise condensation | 150,- | |
| Jd | Mixtures / injection condensation | 150,- | |
| K | Thermal radiation | ||
| Ka | Surface radiation | 150,- | |
| Kb | View factors | 190,- | |
| Kc | Gas radiation - radiation from gas mixtures | 150,- | |
| Kd | Thermal radiation of gas-solids mixtures | 190,- | |
| Ke | Thermal radiation in furnaces | 150,- | |
| Kf | Superinsulation | 190,- | |
| L | Pressure drop | ||
| Lab | Pressure drop in flow through pipes | 150,- | |
| Lac | Pressure drop in flow through pipes of changing cross-section | 190,- | |
| Lad | Pressure drop in crossflow over bare and finned tube bundles | 255,- | |
| Lae | Shell-side pressure drop in shell-and-tube heat exchangers | 190,- | |
| Laf | Pressure drop in flow through beds | 150,- | |
| Lah | Pressure drop of suspensions and mud | 190,- | |
| Laj | Maximum gas flow rating in laminar flowed tubes | 150,- | |
| Lba | Gas-liquid flow | 150,- | |
| Lbb | Pressure drop of gas and liquids in pipes and fittings | 150,- | |
| Lbc | Pressure drop in flow through evaporator tubes | 150,- | |
| Lbd | Calculation of critical mass flow | 190,- | |
| Lbf | Pressure drop and flood point in trickled beds of packing | 150,- | |
| Lbg | Wet pressure drop and emptying of tower trays | 190,- | |
| Lcb | Flow patterns and pressure drop in fluidized beds | 190,- | |
| Lcd | Separation of solids from gases in cyclones (see separators and cyclones) | 410,- | |
| Lda | Formation and movement of bubbles and droplets | 190,- | |
| Ldc | Lamellar drop separators | 190,- | |
| Ldd | Pressure drop and droplets separation efficiency in cyclones | 410,- | |
| Lde | Spray condensation with cone jets | 190,- | |
| Module Lk is not included in the text part of the 10th edition anymore | |||
| Lk | Pressure drop in non-Newtonian flow | 190,- | |
| M | Particular heat transfer problems | ||
| Ma | Heat transfer in stir tanks | 255,- | |
| Mb | Heat transfer at finned surfaces | 255,- | |
| Mc | Heat transfer through walls clad with welded tubes | 255,- | |
| Md | Heat transfer to falling films at vertical surfaces | 150,- | |
| Me | Heat transfer to non-Newtonian liquids | 150,- | |
| Mf | Heat transfer in fluidized beds | 190,- | |
| Mg | Heat transfer from a heating surface to fixed and stirred beds | 150,- | |
| Mk | Humidifying and dehumidifying of air | 150,- | |
| Ml | Heat tubes | 150,- | |
| Mm | Pressure drop and heat transfer in plate heat exchangers | 255,- | |
| Mo | Heat transfer and flow in diluted gases | 190,- | |
| Na (Reg) | Heat transfer in thermal regenerators (Reg) | 190,- | |
| Ob | Hints on the construction of heat exchangers | 150,- | |
| Od | Fouling resistances - fouling of heat transfer surfaces | 150,- | |
| LV Heat Atlas module package 1 | 3.100,- | ||
| LV Heat Atlas module package 2 | incl cyclone calculation (CYCL) | 3.800,- | |
| Single LV Heat Atlas modules on CD-ROM require a minimum order of 350,- EUR | |||
| Have a look at our special offers! | |||
